Hyped Fuzz 1/8w resistors

This is a really dumb question, but do I need to use 1/8w resistors for the Hyped Fuzz or can I just angle my usual 1/4w ones up a bit so they fit in the smaller spots?
 

benny_profane

Well-known member
You can do either. The only concern would be shorting with the 1/4W resistors. Be mindful of that and it should work fine.
 

rmfx

Active member
I use 1/4w angled, works fine. You can always bump up the power handling on resistors in any circuit (if they fit).
 
Top