SOLVED Intelligent relay module DPT

[Synchrony Pedalworks]

Anyone know how wire this relay to a PedalPCB board? The top connections are not marked. @Robert any suggestions?

I am using it to momentary control a second PCB. I am running a fuzz face into the Ocelot.

Thanks!

 

[Paradox916]

The pads aren’t labeled (A1,A2,A3. B1,B2,B3)?

You can also put power to it and confirm with a meter that 2 should be center, 1&3 the poles

 

[Robert]

 

[Synchrony Pedalworks]

Thanks, @Robert! I assume that the pads with the green line need to be bridged?

 

[Stickman393]

Thanks, @Robert! I assume that the pads with the green line need to be bridged?

Green = go

And ground.

 

[Synchrony Pedalworks]

View attachment 85990

When I wire the board in this manner, it works, but the LED turns on when the circuit is bypassed and the LED is off with the circuit engaged. Any ideas? Thanks!

 

[Robert]

You could invert the wiring, or we can monkey with how the LED is controlled.

 

[Synchrony Pedalworks]

You could invert the wiring, or we can monkey with how the LED is controlled.

View attachment 86212

That worked! Many thanks!