Petethefuzz
Active member
Hi guys! My kliché mini is acting weird. The LED is always half “on”. When the pedal is bypassed the gain knobs still slightly affect the signal so it’s not truly bypassed. When bypassed I can manipulate the led strength by turning the output knob on the pedal !?Can’t see any thing shorting. Could it be a bad switch or maybe incorrect wiring? My 5. kit so I am no pro… any help would be
Attachments
-
AA23C701-F47F-4199-8679-52C9C41F99C8.jpeg83.4 KB · Views: 20
-
C6E79F83-7665-4584-A2F4-4F87FAD4BCF4.jpeg77.8 KB · Views: 20
-
7B1FD711-982C-47AA-BF07-3F5CB26BC67A.jpeg65.8 KB · Views: 18
-
F7DA9F23-33BB-4452-8468-F3EA4A259009.jpeg50.6 KB · Views: 18
-
85E9F8FE-37B2-4C33-9430-84F8F8FFCFAA.jpeg85.4 KB · Views: 18
-
F86841B7-3133-4C61-866C-2C631A84466D.jpeg91 KB · Views: 18
-
AC781899-FDE1-4920-A2A0-CC815AB6078A.jpeg100.2 KB · Views: 18
-
25203864-0A58-4813-A643-E7CFAC299BC0.jpeg89.1 KB · Views: 21