Loop on dual pedal build

[mandolintom88]

Hello, I recently built a Hydra delay and Byrdhouse compressor in one pedal for a friend. I had someone else requesting me to build one with a loop so he can insert effects in between the compressor and delay of he wants. Im wondering if this is doable with switched trs jacks or a shunting switchcraft jack?

The new one wouldn't have an order switch either.

Thanks in advance,
Thomas

 

[Robert]

Yep, you can do it with switched TRS jacks.

Check out the wiring diagram on page 6 of the Duo-Phase build docs.

https://docs.pedalpcb.com/project/DuoPhase.pdf

You basically wire up the two sides like normal with four jacks, then connect the Tip of FX1 OUT to the Switched Tip of FX2 IN.

 

[mandolintom88]

Thank you Robert!

 

[mandolintom88]

I wired up the loop and it worked perfectly, thanks again for the help!

 

[mandolintom88]

I wired up the loop and it worked perfectly, thanks again for the help!

 

[jimilee]

Couldn’t you run both effects independently as well?

 

[jannickf]

bumping to ask — is there any way to do this AND be able to switch the order of the pedals as well?

 

[mandolintom88]

Couldn’t you run both effects independently as well?

Yep!