Low Tide schematic?

Schematics for new builds sometimes do not appear for a while, and I suggest you do what you can without a schematic. Do what you can with visual inspection and confirming that your part values are correct on the board. Plus you can verify ground and voltage connections on the ICs. Folks may offer suggestions if you post detailed pictures of your PCB.
 
  • Like
Reactions: fig
Schematics for new builds sometimes do not appear for a while, and I suggest you do what you can without a schematic. Do what you can with visual inspection and confirming that your part values are correct on the board. Plus you can verify ground and voltage connections on the ICs. Folks may offer suggestions if you post detailed pictures of your PCB.
yeah good idea on the ICs, ill check those and try to get a pic as well
 
  • Like
Reactions: fig
Back
Top