Popnfreshbass
Well-known member
Finally boxed these guys up tonight. Paragon was a bit tricky since I did the breakout board before leds. But I managed. Live n learn. I used 1n914s and 1n4001s for the clipping diodes. Left them socketed. Also socketed the gain resistors and charge pump so its currently running at standard 9V. I may play around with the voltage and diodes in the future, but this is how it stays for now.
I buggered up the decals on these. Got some big blotches. I think it was too hot/humid the day I did them.
I buggered up the decals on these. Got some big blotches. I think it was too hot/humid the day I did them.
Attachments
-
33B58989-A873-447A-BD2B-C0C5E3FDD401.jpeg210.6 KB · Views: 42
-
92102524-E1DB-4F76-BA21-07D7637D1C75.jpeg256.9 KB · Views: 53
-
ACF206C4-AF93-4771-A0D1-91BF988FFF18.jpeg339 KB · Views: 52
-
5315813B-CFDB-434B-9848-5D492176BC42.jpeg171.5 KB · Views: 51
-
D8D10C0B-6D0B-4058-A3D3-61917330BB9B.jpeg241.8 KB · Views: 41