SOLVED Parentheses not working (not even in Bypass)

[Sasan]

Hi,

Sorry for my noob-thread again. But it’s driving me nuts. My Parentheses is not working...no signal in bypass at all. Can’t really figure out why?! The LEDs are working, changed all three 3PDTs and the jacks, resoldered everything but still don’t get a sound at all.

Pretty sure I’m overseeing the obvious, but don’t know what...

 

[zgrav]

check to make sure that your in and out jacks are wired correctly and not sending your audio to ground.

 

[Robert]

Yep, what zgrav said. It looks like the signal wires are going to the wrong lugs of the jacks.

Ground should go to Sleeve (that one looks correct)
Signal should go to Tip.

 

[Sasan]

Oh man, so it WAS the obvious. Will check when I’m back home (and mark the thread solved)

I think I misinterpreted the diagram in the documentation and thought it’s basically the jack lug besides the ground. Should have checked for that!
Thanks for your quick reply

 

[Robert]

The jacks in the wiring diagram aren't the best representation of pinout, that needs to be updated at some point....

 

[Sasan]

The jacks in the wiring diagram aren't the best representation of pinout, that needs to be updated at some point....

Well, I could have just checked better (read: at all)...never worked with these type of jacks before and thought the way I did it was correct anyways

it’s now working. Thanks a lot