procedure to test a push button

[burger-patty-and-bacon]

While waiting on my SMD SOT23 NPN transistors to arrive from ebay, I want to try and fix the non working tap tempo button.
What am I doing with my DMM on this push button to test it? As a guess, I put my DMM probes onto each tab. Reads 3.2Kohm when not pushed, and 000.2kOhm when pushed and held. Switch is good and issue lies elsewhere?

 

[fig]

I'm thinking it should read infinite when not engaged, but that's out of circuit.

 

[burger-patty-and-bacon]

It is still connected to the board.
not able to fix the tap tempo button it seems. i will keep trying. i think the switch is OK so the issue lies elswhere. sure is hard to t shoot with no schematic!