Slightly off topic - caps for an amp

[HamishR]

Specifically .25µF coupling caps for the bass channel on a Fender 6G6-B style amp. I built a 6G6-B a few years ago but made the Bass channel into something else. I'm thinking of making the amp as original spec as possible now so need some .25µF (I'm sure .22 would be fine if that's easier) in something as close to an Astron as possible. The rest of the amp has Sozo caps in it. Sozo don't do .25!

Any ideas on where I might find some?

 

[BurntFingers]

.22uf cap in place of .25uf coupling cap, OK?

I want to try out .22 uf Auricaps as coupling caps in my push-pull 300B amp, but the schematic specifies .25 uf. Is this an OK thing to do?

www.diyaudio.com

Sounds like you'll be fine. 22uf is well within published tolerances of 25uf.

 

[HamishR]

Thanks! It was more about where could I get some but I have found some at Antique Electronics - Mallory 150s. Who knew they made Mallory 150s so big? They them in .47µF as well.