I'm opening up a thread on the Suhr Koko Boost as it's been YEARS and a LOT of A-listers use it in their rig, but still, no one is/has been cloning it!!
They have 2 versions...the one in the double-size enclosure and the newer one in the single package.
I had the dual one and worked to reverse it (Koko Boost Rev 3A), but at the time, I was having issues with my soldering iron and temperature sensor and it fried a couple of the components, so was unable to do an 100% accurate trace/reversal!
I can post what I had and left off and hopefully get some traction in getting this thing reversed and a clone unit/PCB created.
There was also some preliminary schematic(s) created by someone else. I hope this helps.
They have 2 versions...the one in the double-size enclosure and the newer one in the single package.
I had the dual one and worked to reverse it (Koko Boost Rev 3A), but at the time, I was having issues with my soldering iron and temperature sensor and it fried a couple of the components, so was unable to do an 100% accurate trace/reversal!
I can post what I had and left off and hopefully get some traction in getting this thing reversed and a clone unit/PCB created.
There was also some preliminary schematic(s) created by someone else. I hope this helps.
Attachments
-
IMG_3029.JPG425.4 KB · Views: 20
-
IMG_3030.JPG506.9 KB · Views: 18
-
IMG_3031.JPG359.8 KB · Views: 19
-
IMG_3044.JPG251 KB · Views: 22
-
IMG_3045.JPG326.7 KB · Views: 23
-
IMG_3046.JPG289.7 KB · Views: 26
-
IMG_3199.JPG335.5 KB · Views: 26
-
IMG_3200.JPG289.6 KB · Views: 24
-
IMG_3201.JPG256.4 KB · Views: 20
-
IMG_3204.JPG235.4 KB · Views: 20