Testing Basic Relay Bypass (non-latching)

[iamjackslackof]

Hi all,

Quick question about the basic relay bypass. I've got several all put together for some upcoming pedals, but short of actually hooking them up to a pedal, I'm not sure how to test that they all work properly. Is there an easy way to verify they are working? I'm not opposed to putting together a little circuit on Vero or something for future use, since I'd like to mostly switch to relay bypass, but I don't want to connect an unverified relay bypass to a pedal that I've also just built and may have issues as well. Just want to troubleshoot one thing at a time. I have the PCB Auditorium, as well as the PPCB breadboard setup, in case I could use either of those.

Thanks!

 

[temol]

Breadboard + 2 x LED + resistor + power supply (or battery).

 

[iamjackslackof]

Oh duh. This was super easy to test, at least to make sure the LED goes on and off, which should test all the major functionality.

Thanks @temol !