blackhatboojum
Well-known member
I’m curious if anyone on here has ever run into a similar issue before. I have a Truetone CS7 that I use to power my pedalboard. I decided to do some rearranging of my pedals and in the process, discovered that my seabed delay doesn’t like 200ma output number 2. When engaged, the led lights up but, doesn’t delay. It acts like the pt2399 is latching up. The odd thing is, it works in every other 9v output. What’s even weirder is, every other pedal on my board works on that number 2 output. I opened up my power supply and did some visual investigation but, I didn’t notice any bad solder joints or toasted components. I also checked the ma draw on the seabed and it’s only drawing 25ma so uhh… what the hell? Anyone else ever run into something like this?
Last edited:
