Wonder Drive Alternate Values

[dmnCrawler]

I was looking at the docs for the Wonder Drive and the alternative values are the same as the values in the parts list. Should these be different?

 

[Robert]

Well that's confusing, isn't it? I'll have to get that taken care of.

These are the alternate values.
VOLUME A100K
TIGHT B50K

R9 4K7
R15 2K2
R19 20K

C1 330n
C7 10n

 

[Captain_Morgan]

I'm a little confused with which version is which, what is the outcome of using the alternate values vs the original?

 

[BigK]

I've found some differences between my friends Savage drive and the wonder drive I'll post up what I have done as with my mods they sound identical.

Probably is a different version to the one PedalPCB traced but sounds awesome. I also put a trimmer on the bite knob filter to change the frequency of the control and a bright switch as in my research I've found they used both 100nF and 150nF caps - I used a on-off-on switch with a 100n in the center, 47n on one side and 120n on the other. works really nicely to make it even more versatile.

 

[BigK]

Comparing to my friends savage drive and some gut shots I found online these are the mods I made:

R4 - 220r (I used a trimmit with a 100r 1/8w resistor in series with a 500r timpot)
R8 - 100r
R9 - 15K
R15- 470r
R19 - 4.7K
C7 - 2.2nF
C10 - 100n on some gut shots 150 on others (I put on a switch as described above)

 

[dmnCrawler]

Comparing to my friends savage drive and some gut shots I found online these are the mods I made:

R4 - 220r (I used a trimmit with a 100r 1/8w resistor in series with a 500r timpot)
R8 - 100r
R9 - 15K
R15- 470r
R19 - 4.7K
C7 - 2.2nF
C10 - 100n on some gut shots 150 on others (I put on a switch as described above)

Man.... now I need to order another one.

 

[BigK]

Man.... now I need to order another one.

I've just ordered a 3rd board to make another the same as my friend insisted he wanted to buy my tweaked one.