brightlight
Active member
I've read through every thread on the Caesar I could find and this specific issue never seemed to get mentioned to this degree so I'll ask. Also, I know posting pics of the board is standard procedure, but I'm at work right now so I'll have to do that later.
I was hoping that maybe the symptom could be a dead give away for someone here. My rate LED works, the 2 internal red LEDs flash as well, I get sound in bypass, I get sound when active, but only in a few spots on the trimmer. Just wanted to get the good parts out of the way.
Now, when I dial in the trimmer I get no sound on either extreme end, which seems normal. As I approach the center I get anywhere from fuzz to clean, yet non-chorusing signal. When I get real close to the center the signal gets really loud and it sounds like a police siren going off in my house, like insanely high pitched whistling. Does this sound common or familiar at all?
My TL022 and 4558 are from Tayda, my 3102 and 3207 are CoolAudios that I bought from @StompBoxParts so those should be good. I bought 2 sets, swapping them out is on my to-do list when I get home.
Thanks, all! Hopefully this is a quickie, again sorry for lack of pictures at the moment
I was hoping that maybe the symptom could be a dead give away for someone here. My rate LED works, the 2 internal red LEDs flash as well, I get sound in bypass, I get sound when active, but only in a few spots on the trimmer. Just wanted to get the good parts out of the way.
Now, when I dial in the trimmer I get no sound on either extreme end, which seems normal. As I approach the center I get anywhere from fuzz to clean, yet non-chorusing signal. When I get real close to the center the signal gets really loud and it sounds like a police siren going off in my house, like insanely high pitched whistling. Does this sound common or familiar at all?
My TL022 and 4558 are from Tayda, my 3102 and 3207 are CoolAudios that I bought from @StompBoxParts so those should be good. I bought 2 sets, swapping them out is on my to-do list when I get home.
Thanks, all! Hopefully this is a quickie, again sorry for lack of pictures at the moment