• International Mail Service Disruptions
    A large number of international shipments have been disrupted by the COVID-19 pandemic. International shipments may experience longer than normal delivery times.
    Read more…

New profile posts

Started building pedals yr & half ago . Done 4 Rangemasters & 3 Trotsky drives . One Dead Easy dirt .
im 77 yrs old & it probably seems weird for an old dude like me to be building . But I play everyday , blues mostly , some melodic stuff & starting to use mixolydian as much as I can . Live in Canada (Ontario )
hello can you help me if you can please send me detailed pictures of specjal overdrive dumbloid i made but it doesn't work so if you can connect in detail to see where i made mistakes greating harry
G
GenoBluzGtr
what are your symptoms? First thing to check would be the orientation of the LED (for power-on). Do NOT go by how it looks in the picture in the build-docs. The Long Lead goes into the hole labeled "A" (NOT the square pad!!).
G
GenoBluzGtr
Mine did the same thing... bypassed tone was okay, but once the pedal is engaged no sound and LED. Swapped the LED and it works perfectly.
G
GenoBluzGtr
did this help?
My first pedal PCB project... parentheses fuzz v1 in progress.. I’ve found very good inspiring threads here..thank you all...
Hi, I built a MUZZLE and I have the same problem as you on key input. when i make a jumper between key 1 and key 2 the pedal works. on the other hand when I cable the jack sold by muzkding it does not work in several connection possible. if you can send me the pictures of your connection this could help me.
A
anthony81
Thank you, I want help because I just ordered the new connector JACK I display photos.
D
dlazzarini
you need a 1/4” switching jack with 3 lugs. One is a ground and the other 2 are for the tip. One of the tip lugs disconnects from the circuit when a plug is inserted. This is the switched lug and goes in the right hand hole. When a plug is not inserted the 2 tip lugs are connected again the same as if you have a jumper on the board. Does that make sense?
D
dlazzarini
I don’t see any link in this reply to attach a pic
thanks pedal pcb yesterday i got a special overdrive kit via muzikding in germany i would ask you can you send me the photo of the finished pedal if you have a special overdrive that can put together the post amateur friendly greeting Harry
I just made the Mesmerizer and it works great. Only thing is its at unity volume at just under a quarter turn.It has about twice the boost I would think is correct. Any suggestions on what to check? I'm thinking of just setting the knob at 12:00 at unity gain and calling it a day.🤔
M
music6000
You could try a 500k resistor across Legs 1 & 3 of the Volume pot to give you a wider sweep (turns it into a 250k pot)
Top