jwin615

UPDATE SOLVED. I installed the incorrect resistor in position R39. This took me a while to find the time to fix, but I finally got...

Another option is a dual out isolated dc converter and run the opamp stage on +/-5v. Probably make up for the space with lower capacitor...

Unless you want asym opamp Distortion, which is possibly the goal (or it's a typo). But, a 1/10 voltage divider seem really extreme.

R1/R2 values look off Sub a 20k for R2 and try again.

Here's my build. This one took a while, fitting it into the enclosure took a set of careful measurements so that everything would fit...

I think I requested one... It's a James Brown design. Real nice pedal if you can find one not eaten up with battery acid. Typical...

I've refined nuts on guitars for years, finally breaking down and buying some of the Japanese nut files. But this ended up being harder...

Still not sure what this is derived from but I just know it kicks ass. Very reminiscent of a Muff but not as thick. Still beefy and...

Built this one for Brazilian guitarist Sergio Buss, who played guitar with Steve Vai for years! Figured out the layout using some...

Pull the bbd chips and resolder those sockets, for sure. It sounds like you're getting your dry through, so issue is in the delayed...

I'll start with a picture. Up until about 2 months ago, this was a Baritone I had put together in 2020. In late 2021 I began to think...