andrewsrea's latest activity
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with
Love.
Nylon washers to the rescue! @andrewsrea and @DailyDovetails thank you for the tips, tricks, and advice. Thanks to your input, I was... -
Aandrewsrea reacted to Spiff4565's post in the thread Guvenator - More Cowbell! No, I mean more Bass with Like.
I assembled a Guvenator recently and over all I am very happy with it. I'm building another one and rather than PCB mounted pots I'm...
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
Update: got a quick 10 mins to patch up some connections and remove the bezels. I re-boxed everything, tightened everything down, and...
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
Hmm, I've been giving this some more thought, and I'm wondering if the LED bezel could be the culprit. Since I can only get the circuit...
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
Got it, I will give the switch leads a try like this in the near future. Unfortunately, I’m going to have to table this troubleshooting...
-
Aandrewsrea replied to the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed.You've got the trouble shooting process down! Two key pieces of information that I derived from your last post: the fault is replicated...
-
-
Aandrewsrea reacted to DailyDovetails's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
I would reflow the joints in the pot that are causing you the issue. While doing that inspect that there are no rogue globs of solder...
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
Thank you both for the replies and advice. @andrewsrea - It's funny that you mention this, as that is exactly what happened. I started...
-
Aandrewsrea reacted to Erik S's post in the thread Who can indentify this brand logo on a bc109 transisor with Like.
@temol beat me to it!
-
Aandrewsrea replied to the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed.+1 for @DailyDovetails . Anomalies which occur after 'boxing up' are typically 'fit' problems. I've been working on amps and music...
-
Aandrewsrea reacted to DailyDovetails's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Like.
My guess is that something is making a connection to ground that shouldn’t be. If you have a multi meter I would poke around in the...
-
Aandrewsrea reacted to Lytt Effects's post in the thread SOLVED LED BEZEL - Pro-10: Green side not working when boxed with Wow.
Ok, this one is giving me a run for my money. I built one of these already and it worked right out of the gate, with one minor issue on...
-
AGreat point, it could make the attacks on notes harder. I was thinking more in terms of the way they saturate, or in the case of...
-
Aandrewsrea replied to the thread Median Compressor.I recall a couple of TL071 (single op amps), a BF245 FET, and a bunch of discrete T0-92 discrete bi-polar transistors were in the UREI...
