anevilspar7an's latest activity

Reminds me Parasit Studio has a modulation Mod board with a pot for rate and a trim pot depth that could be replaced with 2 wires and...

What does the pinout on your jacks look like? Generally non-switched jacks are 2 pin mono and 3 pin stereo. If you have mono jacks...

A very clever circuit and makes great tones right out of the box. It's sold as the Jump Drive here. The 2nd & 3rd stage use MOSFETs as...

Have you used your Auditorium with other builds successfully? (Just want to make sure it's not the issue) Do you have a DMM to take...

Since I haven't diagnosed the very low output problem with my Boogie Monster yet, I decided to build up an etched pcb version that I...

Would that impact layout or size in any meaningful way? I like that I can squeeze your smaller boards in a 1590B.

@johnk_10 does things a little differently, and it really makes me want to add wire stress reliefs to the boards.

no, i use a relayed true bypass so the wiring is stress reliefed.

What's going on with the wiring? And are you omitting the LED?

BTW, here's a pic of my PCB build:

well, replying to my own post, i still can't get hardly any output form the circuit and i've checked the connections and my soldering...

If I can find my 535Q I'll verify the schematic.

No schematic, I'm afraid, sorry. Q1 and Q2 are BS170, Q3 is 2N2222A and the IC is a LM386. I think the 50Hz bump comes from the IC.

Nice.

That was something I just sort of eyeballed. Nothing too scientific about what I landed on. I think I originally used the vector pedal...