Recent content by Boksholm

SOLVED: It was the switch! The pedal works like a charm now! Thank you all! =)

Bump on the readings from the JFET! =)

=)! 1. 8,53 2. 2,81 3. 0 I can't read what it says on the transistor because a cap is in the way!

Flying: That was just some dirt, but yeah, good catch! =) Sturdag: 1: 8,4 2: 4,2 3: 2,0 4: 0 5: 0 (This one is the leg furthest from the dot) 6: 4,2 7: 8,5 8: 8,4

Sturdag: I see, I'm not really sure which components to measure and where! Gonzo: Ok, I could just switch it, but I would install it the same way, would you guess that the switch is faulty (can volume loss be caused by bad switch?) or that it's installed the wrong way! Thanks for your answers! =)

Of course! Before taking photos I installed the small jumper from one of the pots that can be seen, that was the only connection that looked a bit shady to me, but it didn't work! Photos: https://photos.app.goo.gl/R7tT8zPcyfYGb7yHA Also attached!

EDIT: Problem solved. It was a broken footswitch! Hi! I have a Proco Rat 2 (one with the old power socket). Everything works well but it's has very weak volume, even with vol+dist. on max it's lowers the volume compared to when it's bypassed! The same problem occurs with both battery and ext...

Thanks for your answers! =) It's a friends pedal and he dont want to invest any money in it, but I have loads of 3PDT switches and was thinking about making it for free. But you both are of course right.

Hi! 😊 Im replacing the switch on this guv'nor. I need to cut one row on the new switch for it to fit. Which direction should it be? Vertical as in the pic or horizontal? Thanks!

Hu