joulupukki's latest activity

Gotcha. In the long run (and now), we want the ability for the ESP32 to control the state of the relays. There are two relays in Q-Tune...

To be clear, I was suggesting you add another microcontroller such as the ATtiny13a, and leave the ESP32 alone (i.e. ESP32 strictly for...

Thanks! We went with the Waveshare ESP32-S3 2.8” 240x320 with capacitive touch because it gave us a LOT better looking screen mounting...

Given that the build is already much more complicated than most novices should/would attempt, I don't see the physical act of soldering...

I watched the assembly video last night, I’m digging the 1590b idea.

Make it partial SMD already soldered on and call it Notatún. We know you want to.

Ok, I’m intrigued. I feel like I need to build one, I’m kind of the same as Ryan. I’ve built all of mine, except the tuner.

We explored that direction (treating the incoming signal as a digital signal and interpreting the DC pulses in the microcontroller). In...

Join us Thursday, May 29, at 8 PM Eastern on a YouTube Live Stream where we'll do some intros about who we are, why we started the...

Hi @xconverge, great to hear from you—and I appreciate you keeping an eye on the project! I did originally plan to make Q-Tune open...

Understood, but when there was no signal to begin with my first thought was ICs, then later the jumped jack ... I've jumpered the wrong...

That jumper on the input jack is still the right thing. In the production PCB that connection will already be wired to GND. It was a...

Congrats guys, glad you are seeing it through!

Demo mistake… Remember that component I said wasn’t going to be in the production circuit board that I jumpered? I made a very...

Thanks for the feedback. This was definitely a last-minute type of stream and not really “official.” We’ll make a better one later on …...