mnemonic's latest activity

  • M
    mnemonic reacted to Chuck D. Bones's post in the thread BC550C with Like Like.
    TC Electronics put that transistor in front of the opamp because they used 741's in their original production units. Among all of their...
  • M
    mnemonic replied to the thread BC550C.
    I’m not sure how much of a sound difference it would make, I don’t have the isocoles but I did build the integral pre as it has an...
  • M
    mnemonic replied to the thread BC550C.
    Maybe doesn’t help but my real tc integrated preamp has a bc413c for that transistor. it also has a bc547b for the constant current...
  • M
    mnemonic replied to the thread Expectation: High/Low….
    I wasn’t super impressed by the Wrecktifier distortion, but I built that one right off the back of building the BE-OD clone, which is...
  • M
    mnemonic reacted to dlazzarini's post in the thread Just re-capped my 92’ 5150 with Like Like.
    Haven’t made any pedal for a while because life happens but I did decide to re-cap my old block head. I now have a whole new...
  • M
    mnemonic reacted to Big Monk's post in the thread Inexpensive power supply with Like Like.
    https://www.tedweber.com/wpdlxfmr-1/ https://www.tedweber.com/wpdlxfmr-2/
  • M
    mnemonic reacted to daeg's post in the thread Inexpensive power supply with Like Like.
    That's a good question. I'd think you'd need a transformer with multiple secondaries, rather than multiple taps, for ground isolation...
  • M
    mnemonic reacted to finebyfine's post in the thread String gauge what are you using? with Like Like.
    same but one and a half down. used to go for the heaviest gauges but I like a little bit of the jingle jangle from meds/lights with low...
  • M
    25.5” I do have 11’s on some guitars, but only the ones where the thicker strings sound better on that guitar. I just think thinner...
  • M
    10’s, but down a full step 🙇‍♂️
  • M
    mnemonic replied to the thread Inexpensive power supply.
    can you get by with just one transformer, but an individual secondary (and rectifier, filter, regulator) for each output? I’ve seen diy...
Top