Worked these out to do a run of standard layout large/small layout pedals. Figured I'd post the link to them here for anyone who would find them useful!
I struggled with aligning enclosures reliably on my drill press for a while, and these have taken all the guesswork out for me. Basically you just align the drill with the center hole on the jig (I use a long screwdriver bit) and clamp down the plate. The guides will keep the enclosure aligned in all six knob positions - this link also has a jig for the footswitch/led placement and a jig to clamp to a fence that can align the input/output/power holes on the end too.
I struggled with aligning enclosures reliably on my drill press for a while, and these have taken all the guesswork out for me. Basically you just align the drill with the center hole on the jig (I use a long screwdriver bit) and clamp down the plate. The guides will keep the enclosure aligned in all six knob positions - this link also has a jig for the footswitch/led placement and a jig to clamp to a fence that can align the input/output/power holes on the end too.
Pedal pcb drill press jigs by gschell81 | Download free STL model | Printables.com
a pile of drill press jigs that will line your drill up with the standard hole placement for pedalpcb designs. | Download free 3D printable STL models
www.printables.com