Really need help with a stripboard layout on my dual mono Low Tide

C

captain

Active member
I was wondering if anybody can help me out? I'm in the process of building a dual mono Low Tide and want to incorporate Ethan Winer Mojo Maestro LINK to add some saturation. I would really like to add this on a stripboard to keep it tidy in the case. I have tried to draw one up, but with the limited knowledge I have I can not work it out.

If someone could kindly draw one up for me, I would really appreciate it. Only one channel Is OK as probably can take it from there.

Thanks

thumbnail_IMG_3642 (1).jpg
 
I'm a fan of the circuit, but I haven't taken a look at it for a few years now. I had started a [EDIT: PERF] layout for it...


MOJO MAESTRO PERF.png



Looks like I could finish it up fairly easily — let me know if there's any interest in my doing so and I'll try to get to it early this next week.
 
Last edited:
Bear in mind that the Mojo Maestro's performance will vary depending on the output level and impedance of the device driving it. An extreme example would be direct driving it from a guitar. Most guitars will not make a strong enough signal to drive the diodes into conduction and the Mojo mode capacitor will make a guitar's tone quite dark.

Did you plan on putting the Mojo Maestro on the input or output side of the Shallow Water?
 
You must log in or register to reply here.
Back
Top