Search results

You have to take your time with switches, they can't handle the heat very well. With stomp switches I always solder left to right so I solder a different switch group each time, but most important I always wait 10-20 seconds between soldering another leg. It takes time but not as long as having...

I think this is how it is wired up

I think I am lucky in Australia that we don't have too much problems with taxes when we buy from overseas, I am glad that the family moved here when I was a young kid. I did first strum a guitar in Sweden though when I was young, I think I was about 10 years old when I first started playing.

The drill template is there so you can get the enclosure machined at Tayda or any other machine shop, if I was to do it it home I think I would just pick a nice pattern and drill lots of holes. The slots and holes are only there so you can see the tube, I don't think they are needed for cooling...

There are drill templates for the Sushi C2CE PCB's boxes so you can get them machined at Taydas when you order the boxes, many other places will machine your box as well. https://forum.pedalpcb.com/threads/c2c-electronics-tayda-drill-templates.18007/ There are also basic paint files so Tayda can...

I would not use an ON-OFF-ON DPDT switch on this build, it was made for a DPDT ON-ON-ON switch. The single SPDT switch is ON-OFF-ON but the DPDT switch should be ON-ON-ON. The build document specifies a certain switch from Tayda so you could get the switching from that switch document...

I don't know what would happen if the wrong type of switch was used, I only thought of it when I ordered a King Nothing PCB yesterday and I started to check if I had to order any parts for my build. I just seemed like that was the area you were having problems so I thought I should mention it, I...

Did you figure this one out ? Is the mode switch the correct ON-ON-ON switch or could an ON-OFF-ON switch have gone in by mistake ?

The walkthrough was very easy to understand and the templates look good, I do have one little request though.... Would it be hard for you to make a template for the Ambassador and the Black Eye that has "For Bass" in the bottom right corner ? I am making them with bass mods and normal so I would...

There might be a small solder bridge between pins 7 and 8 on the 555 timer on the bottom of the PCB. It's very small and hard to see so I am not sure.

Well I cant shake the symptoms, every day I find myself checking to see if the shop is open yet. I have a feeling it wont be too much longer till I am cured, I keep sensing new PCB's being stacked up ready for me to buy.:)

Can you take another picture with better lighting ? I find it very hard to see the colour bands on the resistors.

You need to take as much time as you AND your family need you to take, they come before anything else, and you are no good to anyone if you are not well and healthy. I understand about needing sleep and being tired, I used to work too much when I was young as well and it gets to you in the long...

I think I have a problem, every day I check to see if there are any PCB's for sale at C2CE even though I know there won't be. I check Talk Bass and PedalPCB forums every day as it is so I know there would be a notification put up if Nathan was back in the shop, I still keep checking Sushi Box...

Just wondering if you have had a chance to look for the Supersonic Tayda Drill Template yet ? I would still like it just so I can make a fascia template for when I eventually make a Supersonic. I will order one when you get some more PCB's in stock. Thanks Mick

He installed a Mute switch in his build, (Which I am going to copy ) He placed it on the wire between the In jack and In on the PCB. Post 292 on the Talkbass forum https://www.talkbass.com/threads/conspiracy-to-commit-electronics-megathread.1640493/page-15

Could I be cheeky and suggest you try some 2M switches in your future revisions instead of 1M switches ? The 1M switches are 0.41mm longer then the 9mm pots when mounted so you can get some tension on the PCB if not careful. The 2M switches are 0.17mm shorter then a 9mm pot as long as you leave...

If you get some Lumberg KLBM3 1/4" jacks you should have no problem with that (I think). They are less bulky then the jacks you have in there now. They are my favorite jack for stompboxes. https://www.taydaelectronics.com/hardware/6-35mm-1-4-plugs-jacks/6-35mm-1-4-mono-phone-jack-socket.html

I think it would be better to run the heaters at 12V if possible, it's amazing how much voltage drop you can get in a normal PCB copper trace. Running at 6V you carry twice the amps compared to 12V and it is the amps that cause the voltage drop (without getting too technical guys) It might just...

Just for general information, there are many different tube heater voltages used over the full spectrum of tubes out there. If you need a tube running on a specific heater voltage you just have to find a tube that will match your circuit as close as possible, many tubes are very similar but with...