Search results

  1. C

    DIY Stereo Loop Box

    Someone should make a PCB board with (2) DPDT relays…. I could use one for my amp switcher
  2. C

    DIY Stereo Loop Box

    All grounds get connected together, the ground from the jacks, switch, and negative power supply if you are using power
  3. C

    DIY Stereo Loop Box

    Yes
  4. C

    DIY Stereo Loop Box

    It is either open or closed.
  5. C

    DIY Stereo Loop Box

    In the diagram you show, in normal position your signal comes IN and straight OUT with the SEND grounded. Push the button and now your IN signal goes to the SEND (through the loop) and back to the RETURN then OUT. There is no LED shown in your diagram.
  6. C

    DIY Stereo Loop Box

    http://www.geofex.com/article_folders/millenium/millen.htm
  7. C

    DIY Stereo Loop Box

    Yes. He says you would need 5 rows of lugs to do this in stereo, or use the row of lugs meant to be for the LED as the row of lugs to do the stereo side. The millennium wiring is using a transistor circuit to activate the LED instead of the actual switch
  8. C

    DIY Stereo Loop Box

    No, the link I added
  9. C

    DIY Stereo Loop Box

    It was not in stereo. Looks like you could use a 4PDT and a millennium circuit for the LED
  10. C

    DIY Stereo Loop Box

    Check out this site, I used their diagrams to create my looper. https://www.singlecoil.com/tb-strip/tbstrip.html
  11. C

    Missing Build Docs / Schematics

    Anyway to see the schematic for the Soldano SLO? Do you think this sounds closer to the real amp than the Victory Jack pedal
  12. C

    Using a reactive load

    Just want to be able to try different IR’s instead of my 1x12. Never thought of putting the reactive load between power amp and speaker. So that would work similar to an attenuator?
  13. C

    Using a reactive load

    I have a Marshall DSL40C, a DIY Suhr reactive load box, Valeton IR Coral box, and a Headrush FRFR108. Will this work without harming the amp: DSL40C 16 ohm output -> DIY Suhr reactive load box -> Valeton IR Coral box -> Headrush FRFR108 powered guitar cabinet Thanks Rob
  14. C

    Diplomat - Matchless DC30's EF86 Channel

    Curious, why was R21 (470K) added to your build? I do not see it in the schematic I see online for this channel.
  15. C

    Diplomat - Matchless DC30's EF86 Channel

    Do you have a sound sample of the Diplomat
  16. C

    Skeptical Buffer Mockup Pedal - Arriving Soon!

    Can we get the BOM? Would like to add these parts to my next order.
  17. C

    6 Band EQ formula?

    I have been trying to re-create the ADA MP1 sound. I made a tube version, with the buffer and OP amp distortion going into the tube section. It works, but I was not able to get the EQ section working great. I decided to try to make a simpler version of the ADA MP1 EQ section. I got it to work...
  18. C

    6 Band EQ formula?

    Got it working, stupid me. Pin 1 from the pots was not soldered. Now, I was thinking of adding this EQ to the end of the new Victory preamp circuit for their V1 pedals. I thin their new design sounds very good. The Kraken, Sheriff, and Jack circuits are very similar. I attached a copy of the...
  19. C

    6 Band EQ formula?

    Yes
  20. C

    6 Band EQ formula?

    Okay, I built the 6 band EQ, but only used 4 of the bands. I made it with the 4 frequencies as the MP1 just changing (4) caps per the calculator. And it works, but the volume drops a lot. I am guessing i could increase resistors R3, and or R7 to increase the volume. Does that sound correct to...
Back
Top