Search results

Does anyone have a suggestion for a pcb that uses the Reticon SAD1024 BBD? A few were gifted to me so i thought i would build something. I am not really a phaser guy but maybe i could learn. Thanks Pb

Thanks for the detailed explanation! My plan is to use 1uf + .47uf in parallel. Looking forward to the chain saw😁 Pb

Thanks. I suspected that section was sensitive. Pb

The promethium calls for 1u5 elec in c16. 1u5 is uncommon. Nextgen (local) guitars sells 0.47u caps. There is a postal strike on here so my options are limited. I can put a 0.47u in parallel or just go with a 1u cap. Thoughts? Pb

thanks Pb

Thanks That clears it up. I have a black and white print out. I couldn’t see the red! Pb

Hi Question about the board for the hm-2/promethium pcb: The top has (Blank) + A K - (blank) + - are power A K are LED The blanks should be the input/output positive but i am just assuming. Can someone confirm? The input/output negative go to the stomp Thanks Pb

Thanks Better to ask. Removing stomps is no fun Pb

Just wanted to confirm. The stomp switches mount on the side that says “this side down “ right? Thanks Pb

I found the thread: https://forum.pedalpcb.com/threads/paragon-kot.1638/#post-12872 Maybe I will keep it but it is good to know how to disable it. Pb

That makes sense. thanks Pb

I looked at a few other schematics and don't see a charge pump in the design, e.g. theseus (aeonfx). I am wondering what the difference is without it. I am wondering why it was added. If i choose to remove the charge pump, is there a wiring fix required? thanks Pb

I have done charge pumps (sunface). They fit nicely in the pedal bard with others. I have done battery only (treble booster) that also fit in a pedal board with others. I think it depends on what transistor you want. You could also find decent germanium npn. Pb

Aculpulco gold. I have about 5 fuzz pedals. It is by far the heaviest fuzz/distortion i have heard. It has very few parts and should be an easy build. Pb

True. I probably should have paid the extra for the upgraded output transformer🙄 with 3 windings. Pb

I think that is probably an cheaper/simpler option. Odds of finding a used z matcher are slim. Thanks Pb

i was wondering if anyone has built a z matcher pedal/box that matches the impedance between amp head and cab. I have cab with a v30 16 ohm (that i like) but the 5e3 amp head output is 8 ohm. Thanks Pb

Thanks. Good point. i can just wire it directly on the bb and remove the jumper to test with and without the gain. Pb

https://docs.pedalpcb.com/project/TwillDeluxe.pdf Hi all, I am looking into breadboarding the twill to see what it sounds like. I guess the gain switch requires one stomp connection and another for the led. Any reason i can’t use a dpdt stomp? It will save a buck but also space. I am also...

1+ I am pretty confident that guitar pcb sells real legit parts. I have ordered a bunch from him. Pb