Search results

  1. C

    using NPN instead of PNP in fuzz

    Asking about using in the Zonkbox fuzz
  2. C

    using NPN instead of PNP in fuzz

    Can you use 2N3906 in place of the (3) GE's called out in the BOM?
  3. C

    New project stuff maybe?

    Are you planning on trying to make the Uber board?
  4. C

    New project stuff maybe?

    I once had a Victory Kraken, and the one thing i liked about it was the switching. So i made a pedal that allows me to switch in another preamp pedal that allows me to have basically a (3) channel with my Marshal DSL40C based off the Victory switching scheme.
  5. C

    DIY Stereo Loop Box

    Yes
  6. C

    DIY Stereo Loop Box

    Someone should make a PCB board with (2) DPDT relays…. I could use one for my amp switcher
  7. C

    DIY Stereo Loop Box

    All grounds get connected together, the ground from the jacks, switch, and negative power supply if you are using power
  8. C

    DIY Stereo Loop Box

    Yes
  9. C

    DIY Stereo Loop Box

    It is either open or closed.
  10. C

    DIY Stereo Loop Box

    In the diagram you show, in normal position your signal comes IN and straight OUT with the SEND grounded. Push the button and now your IN signal goes to the SEND (through the loop) and back to the RETURN then OUT. There is no LED shown in your diagram.
  11. C

    DIY Stereo Loop Box

    http://www.geofex.com/article_folders/millenium/millen.htm
  12. C

    DIY Stereo Loop Box

    Yes. He says you would need 5 rows of lugs to do this in stereo, or use the row of lugs meant to be for the LED as the row of lugs to do the stereo side. The millennium wiring is using a transistor circuit to activate the LED instead of the actual switch
  13. C

    DIY Stereo Loop Box

    No, the link I added
  14. C

    DIY Stereo Loop Box

    It was not in stereo. Looks like you could use a 4PDT and a millennium circuit for the LED
  15. C

    DIY Stereo Loop Box

    Check out this site, I used their diagrams to create my looper. https://www.singlecoil.com/tb-strip/tbstrip.html
  16. C

    Missing Build Docs / Schematics

    Anyway to see the schematic for the Soldano SLO? Do you think this sounds closer to the real amp than the Victory Jack pedal
  17. C

    Using a reactive load

    Just want to be able to try different IR’s instead of my 1x12. Never thought of putting the reactive load between power amp and speaker. So that would work similar to an attenuator?
  18. C

    Using a reactive load

    I have a Marshall DSL40C, a DIY Suhr reactive load box, Valeton IR Coral box, and a Headrush FRFR108. Will this work without harming the amp: DSL40C 16 ohm output -> DIY Suhr reactive load box -> Valeton IR Coral box -> Headrush FRFR108 powered guitar cabinet Thanks Rob
  19. C

    Diplomat - Matchless DC30's EF86 Channel

    Curious, why was R21 (470K) added to your build? I do not see it in the schematic I see online for this channel.
  20. C

    Diplomat - Matchless DC30's EF86 Channel

    Do you have a sound sample of the Diplomat
Back
Top