Search results

It's always been free, so I'm not quite sure how to take that. :unsure:

I think "Coarse Delay" was one of the first blocks I ever implemented directly in Java. It predates the "SpinCAD Builder" language. It has a self contained feedback loop as compared to the external one in the Three-Tap (or Triple-Tap) delay block, which is what I recommend you use instead...

As SpinCAD Designer doesn't implement pot skip routines in any blocks yet, I devised a way to fade the heads in gradually. This can be applied to things besides delays. I'm probably going to add a block that DOES do the pot skip on something like a 4 or 5 head delay concept in order to bring...

A regular 1-pole filter rolls off at -6 dB/octave, which is rather gentle. Not exactly "vertical". The idea behind making it "shelving" is to set the point at which it stops going down, and rather flattens off again. If anything, it makes the filter "shallower" and more subtle than one which...

I'll check it out. Thanks for the report. DL

Well, since you asked nicely. :D https://www.patreon.com/holycityaudio

WRLX and WRHX are only needed if you want your filter to be "shelving". RDFX followed by WRAX is just a 6 dB/octave low pass filter. I'm pretty sure the corner frequency is the same regardless of using WRAX, WRHX or WRLX after RDFX. I wrote an article about it behind my paywall but because...

Flangers really sound better IMO with some feedback going on. Try both direct and phase inverted.

https://github.com/HolyCityAudio/SpinCAD-Designer/releases Fixed introduced bug (build 1030) in simulator. Simulator again works whether or not scope is enabled. New "Vee" control block. Audio mixer blocks all have their lower level of "gain" preset at -18 dB rather than -24 dB. 4 to 2 mixer is...

Use the Triple-Tap delay. There's nothing that you can't do with that that the other ones did. If you don't hook up a tap, code is not generated for it. Secret tip - if you have existing patches which use this block they will still work. And if you are desperate you can copy that from an...

You can load a HEX file into any slot. If you give it a regular HEX file used to program a full 8 programs in a 24LC32, it just takes the first one. So if you want the 5th program in a HEX file you'll need to trim the first 4 programs out of the file. I don't know if people ever use this...

It is possible to import a hex file into a patch slot of a SpinCAD bank. When you do that, it only takes the first patch from the hex. If you have a hex file with 8 patches in it and you want the 3rd one, then you have to trim the first two out of the hex file. It may take some effort on your...

The tap tempo block was supplied by "slacker" and was part of his babelfish project over at diystompboxes.com. https://www.diystompboxes.com/smfforum/index.php?topic=104291.msg986526;topicseen#msg986526 Ah take a look at the schematic, esp. the wiring of the signal to POT2. There's your...