Search results

I understand what they are saying but the TL072IP datasheet says max 36V. Also if you run the Eunuch Buffer at 35V and the TL072 can only handle 17V wouldn't it fry the chip? Can someone check me on the datasheet to make sure I am reading it correctly.

CLEAN! Love it man!

I haven't had a chance to use it. I was thinking of using it to isolate a fuzz once I build one. It doesn't have a buffer using the loop. It is bypassing the pedal completely.

Just finished the send/return on my Skeptical Buffer and wanted to share for anyone wanting to add one to their build. I had success with (1) Switchcraft Shunt jack and (1) Switchcraft Mono jack. The Shunt jack let's you connect to the other side all the time. Unplugged, the shunt jack shunt...

I did layout a 1590B with top jacks. I think the 1590G was too short for the jacks.

*casually changes white foot switch washer to metal one just purchased*

@Bricksnbeatles didn't do the dc jack or led yet. Need to diagram that out to be sure

Lemme make you more happy then. The 125b drill template works on my 1590G. The second line is my midpoint. I'll let you know how the drilling goes tomorrow.

This was my initial thought. I wanted something really small that I could just plug in on the spot. But most of the time I would have it on a board and I can use an adapter later on.

You all are right. Going 9v when I dont use it, is weird. I am going with the 1590G. Just started marking it up.

I am about to drill a small booster pedal. I can't decide either 1590B or 1590G. I originally decided on the G but got the B for more space since it is so tight. B would give more space and I can have a 9v battery. But the G is smaller and I don't really use the 9v batteries in my pedals...

Authentic 22k. TheToneGeek did a teardown of one.

I was also thinking of putting a resistor parallel with a 25K pot to make it around 22K. 180k == 21951.2195 Ohm 200k == 22222.2222 Ohm (in a perfect world) Or even a trim resistor to fine tune it.

How much mojo is in those?

Heck yeah it is all for the mojo.

Looks like C2 and C6 separated from the the main row to give a little more space.

Thanks everyone!

Thank you I am looking for the other plug side like in the picture. Is there a reliable US seller to save on shipping?

Anyone got a source for good fitting 2.1mm plugs? I made my own 9V battery adapter for bench testing using some Tayda dc plugs. Unfortunately, they don't make proper contact with my pedal dc jacks.

How much discount do they do when MiniBear has a sale? $69 is really steep for an enclosure.