Search results

I swapped daisyseeds with no change. Again the bypass sounds PRETTY good and doesnt have the whine I was hearing. (With the help of some LLMs) I got to a working solution for my needs though! I captured the output from the pedal into my DAW to view the waterfall and was able basically fully...

Fixed the input/output jacks to have the enclosure properly grounded (checked before and after with a multi-meter), no difference to the noise I am hearing Tried a tl074 instead of the mcp6024, no real difference I could hear The noise is pretty minimal when the effect is bypassed (I tried...

I finished my funbox build and unfortunately the noise level/high pitch sound I am hearing is a non-starter When I find a few more minutes, I will swap the daisy with my other one from my kshep pedal and see if that changes anything I wanted to comb over the schematic and any other potential...

For those kewpie fans, can anyone elaborate on the mode/URA switch at the top a bit? for my high output humbuckers, if this switch is down or off, I overload the circuit with sustain like at 9 o clock. It gets REALLY muffled/boomy/and seems to maybe be clipping pretty badly (does not sound...

Also late to the party, and not exactly what you are looking for (least intrusive) but I fixed my behringer BDI21 by adjusting the capacitors in the switching circuit Mod #2 in this article http://www.geofex.com/Article_Folders/bosstech.pdf I didn't have luck swapping the capacitors, so I just...

I just ordered 5x PCBs also (JLCPCB Order Total: $5.85). I have been loving the BE-100 NAM profile and wanted to basically just make a dedicated pedal for it!

If I have a muffin fuzz (built the Stomp '75/Violet Ram's Head variant), and it was my first fuzz ever, would building a Kewpie be dumb? I am also considering a carcosa. I run it boosted with a plumes and really like it, but find I need to dial back my guitar volume (I have hot humbuckers) a...

Yea I was considering an automated pipeline for recapturing/retraining with existing models like you mentioned using NAM to playback

I have all of the captures from it (https://www.tone3000.com/tones/marshall-jcm800-2203x-27847), I wasn't super into it compared to the BE-100, it didn't seem to train with the low fidelity/parameters as nicely either I did the Sansamp BDDI myself just because I have one and wanted to do the...

Another option, I asked nicely and sent a small donation as a thank you, to someone for their original captures and then retrained the models with the lowered fidelity/parameters for an amp I was interested in. https://github.com/bkshepherd/DaisySeedProjects/pull/69 I considered distillation...

I really enjoyed Geraints talk, I had a branch at one point starting to try and use the signalsmith-stretch algorithm on daisy but it just wasn't going to happen IIRC

A lot of options but you want to build with debug symbols and then attach the debugger, and leave it running for a few hours and come back to it and see the stack trace when its crashed. There are a lot of other options but this is my favorite/preferred way, I would experiment/play a bit to make...

If you had a stlink it would potentially give you a smoking gone first try I find mine VERY valuable to use, just in case you happen to have one!

Will the code be open source? I had been checking in on the project here and there since we first crossed paths last year, but it looks like all repositories are no longer public

Congrats guys, glad you are seeing it through!

The version I put in https://github.com/bkshepherd/DaisySeedProjects should work fine that project supports the terrarium FYI, all effects should work, you can tweak the loaded effects to just contain the 1 effect you want

I would peek through here and see if it sounds familiar https://forum.pedalpcb.com/threads/anyone-build-a-terrarium-with-daisy-seed-v1-2-rev-7-im-getting-unusually-bad-noise-solved.21901/

What value resistor do you have in the LDR slot

I opted to do my first PCB of a known circuit/schematic to isolate variables. It allows you to develop skills independently. PCB design vs circuit design vs integration of well-tested circuits etc. I would encourage you to start with ANYTHING that solves a problem for yourself to keep you...

The schematic shows the switching portion, D2-D10 and the 3 pulldown resistors. It uses a combination of 3.3v signals on pins 16,17,18 to switch effects. I would start by just not populating any of those diodes. The 3 pins are for binary counting between 0 and 7, so all 3 with just the pulldown...