Search results

Got it . Thank you.. That's what I did. For me, DEFINITELY, a circuit needing much more focus on dialing in the trimmers to getting it to sound right. Tweaking the trimmers ever (EVER!) so slightly will change the sound a bit so I'd go back several times adjusting the trimmers. Mine works ...

Finally got mine working. Is there a specific order to tune the jfets in?

Yes the orientation is correct. Any way you could point out the bias resistors to be replaced? And possibly the trimmer values needed ( I know it almost seems like I'm asking you to do it for, me but I'm not I just don't know enough yet to figure it out myself. Thanks for the response and...

Would it be possible to swap the bias resistors out for trimmers? If so, one would tie 2 legs of the trim pot together and then the 2 leads on the trim pot go in where the bias resistor is/was.. Can I raise or lower the value of any pots to coax more gain out of it or changing the 2n1306 to...

kinda the weird thing cause the lfo seems to be working cause the pots are affecting the rate LED. I thought anything over 5 v would fry the pt2399. Though I don't think the 2399 creates any of the LFO. maybe it is fried and that is why I get no signal Signal tracing the signal dies at...

By load you mean my guitar plugged into it or a signal put into the circuit? No . That could change the voltage?

what would cause the 78l05 give an out put of 7.5 volts ? I can't figure it out.

Is the Expression Jack wired in per schematic ? No. But it is now and though it works still does'nt seem to be as high gain as you tube vids The bass and mid have a weird interaction to me I was wondering since r23 and c17 are socketed could I coax any more gain out of it raising or lower...

Awww damn and I've seen/read your sense of humor too But it's too late man I'm down that rabbit hole and I'll find the answers

Thank you for the homework assignment. Never heard that term before but I'm sure there is a whole lot I've never heard before so off to Google school I go Thanks for the input.

Thank you very much your help is very much appreciated . I will definitely check over EVERYTHING again. I have no doubts that you have found errors in some of his layouts because so have I, but I will say I've built around 80-100 (if not more) pedals from that site and only twice did I find a...

I apologize I answered without double checking. No, Q6 is not germanium it calls for it being 2n5457. q1 = 78l15 q2 = lnd150n3-g q3 = 2n1306 q4 = 2n1306 q5 = lnd150n3-g q6 = 2n5457 and the voltages Vin @ 18.04v q1 in = 17.31v grd = 0 out = 15.17 q2 d = 15.17v g = 7.10v s = 7.51v q3 e = 5.86v...

yes please

Thank you for your input and your time. I'm always happy when I get words of wisdom from your fantastic brain. I always have a lot to research afterwards though (not a complaint whatsoever.) Things like active constant current loads and I think of my kids and their diapers. Yes the 2n1306...

Ahhhh thank you so much . Thats the kind of info I was hoping for . In my searching it seems there are different transistor configurations and I had no clue where to start with that. Now I got a experimenting point . Again many thanks

Y Yeah Im really looking forward to hearing my FL9 especially and my BossBF-2 is only a couple parts away from completion. Maybe I mentioned it maybe not but recently built Seppuku Mind Warp which I really liked ( so much it got a box) but its still not quite what Im looking for which I'll...

I finally got back to this put in j201's biased it best I could and finally got some crunch out of it. I was having some serious problems getting the trimmers to bias properly cause I used the shitty cheap ones . So I removed the shitty ones and put in some better ones I should have left it...

I guess my age is why I never think of using my phone and taking pictures but excellent idea. Maybe I'll take pics of all my notes and stuff then it'll be backed up at least.

Kinda felt it'd be just a hand full of people who'd keep notes on builds. I was hoping for more to try others favorite or even different settings maybe I should ask what peoples current pedal train consists of being a bit more broad of a question. Most of the time Someone says something I gotta...

I do. 3 ring binders for all my printed pedal build docs. and spiral notebooks with my pedal chains and settings. I also have notebooks with my likes and dislikes about all my builds. and a few more notebooks on each pedals horoscopes. how else would I know whos gonna get a long with...