Search results

No, the link I added

It was not in stereo. Looks like you could use a 4PDT and a millennium circuit for the LED

Check out this site, I used their diagrams to create my looper. https://www.singlecoil.com/tb-strip/tbstrip.html

Anyway to see the schematic for the Soldano SLO? Do you think this sounds closer to the real amp than the Victory Jack pedal

Just want to be able to try different IR’s instead of my 1x12. Never thought of putting the reactive load between power amp and speaker. So that would work similar to an attenuator?

I have a Marshall DSL40C, a DIY Suhr reactive load box, Valeton IR Coral box, and a Headrush FRFR108. Will this work without harming the amp: DSL40C 16 ohm output -> DIY Suhr reactive load box -> Valeton IR Coral box -> Headrush FRFR108 powered guitar cabinet Thanks Rob

Curious, why was R21 (470K) added to your build? I do not see it in the schematic I see online for this channel.

Do you have a sound sample of the Diplomat

Can we get the BOM? Would like to add these parts to my next order.

I have been trying to re-create the ADA MP1 sound. I made a tube version, with the buffer and OP amp distortion going into the tube section. It works, but I was not able to get the EQ section working great. I decided to try to make a simpler version of the ADA MP1 EQ section. I got it to work...

Got it working, stupid me. Pin 1 from the pots was not soldered. Now, I was thinking of adding this EQ to the end of the new Victory preamp circuit for their V1 pedals. I thin their new design sounds very good. The Kraken, Sheriff, and Jack circuits are very similar. I attached a copy of the...

Yes

Okay, I built the 6 band EQ, but only used 4 of the bands. I made it with the 4 frequencies as the MP1 just changing (4) caps per the calculator. And it works, but the volume drops a lot. I am guessing i could increase resistors R3, and or R7 to increase the volume. Does that sound correct to...

Got it fixed, another bad pot. Works now, thanks!!! Anyway to see the schematic for the Doxie?

Thank you!!!

Having issues with my Bobby build, is there a schematic, and PCB layout? Need it to figure out my build

Yes, i do have a 7 band eq, Danelectro Fish and chips. Using the calculator link, i came up with the cap values to get 160hz, and 600hz. I do not know much about the Q filter, but changing these same values from C1 to C2 really changes the Q. See attached:

Is it possible to use the Pedal PCB board, and just change some components values to get to the same frequencies? I do not want to convert the pedal PCB to match the MP1 schematic, just throwing that out there based on your comment about jumpers and cuts....

I want to be as accurate as possible With all the preamps I have made, to my ears the distortion is basically the same, just different levels of gain. And what seems to be the difference between the amps is the tone stacks. I love 80’s Rome (Extreme, white Lion), so I wanted to try to create...

I would like to re-create the ADA MP1 eq section using this pedal PCB, and only using (4) of the (6) pots. The frequencies, i believe are: Treble - 1.6k Mids - 600 Bass - 160 Presence - 3k Would it be fairly easy to switch some values to get these frequencies? I tried plugging in different...