Search results

  1. M

    Taqueria Overdrive Mockup Pedal - Arriving Soon!

    Mine’s gonna be labeled ¿¡MAS!?
  2. M

    Chili Dog Overdrive

    Is the drill template for this one available yet? If it becomes available, will the drill template change (besides the diameter of the drilled hole) if using the 3PDT switch board instead of the 4P3T board?
  3. M

    What's on the workbench?

    Ugh, clearly whoever built that pedal isn’t going anywhere in this business (Sidebar I’m team outie Jack til the day I die)
  4. M

    Any PPCB or other Boss DD-3 (digital delay) clones?

    Could be wrong but I think the "warm" mode in the DD-8 is supposed to be a DD-2/3 emulation? The DD-2/3 really is something special in the world of digital delays, I dunno if any of the FV-1 delay algos out there currently model the analog bits in the audio path?
  5. M

    What's your favorite tremolo pedal circuit?

    Highly recommend it! Low parts count makes for a quick stripboard build or breadboard if you don't wanna order and wait for a PCB.
  6. M

    What's your favorite tremolo pedal circuit?

    The EA trem, it's got *such* a great pulse-y character, and with no depth it's a fantastic boost.
  7. M

    Fake OPA2134PA from Mouser????

    It looks like if I tried to re-draw the Burr Brown logo from memory. "It's two Bs in a box, right? How hard could it be?"
  8. M

    Parentheses clipping mod w/jumper?

    That's correct, jumpering D4 and replacing D3 and D5 with germanium diodes would make that setting symmetrical GE clipping (one GE diode in each direction).
  9. M

    Parentheses question about C15.

    Nope! Yep!
  10. M

    DEMO Lead Solder Overdrive

    To add my $0.02, I've built two Lead Solders at this point, both just my usual method of two 6" unshielded pre-cut pre-stripped pre-bond stranded 24awg from @StompBoxParts run along the sides of the enclosure, and neither have had noise or oscillation issues. I think that first build report...
  11. M

    SOLVED Switch popping and noise galore with Bootleg and Glory Hole

    Also, there’s no reason that C11 needs to be 10u on the Bootleg, you can definitely get away with a 1u Film or Tantalum with no noticeable change. I’m assuming JHS went with 10u there just because that’s what it was on the original TS. EDIT: probably same with C9 on the Gloryhole. They’re DC...
  12. M

    SOLVED Switch popping and noise galore with Bootleg and Glory Hole

    Might start with the electrolytics in the audio path. The current that electrolytics leak can cause popping and other weirdnesses when they’re in the audio path (and why I usually default to subbing in film or tantalum in the audio path unless there’s a specific and good reason not to).
  13. M

    Power jack quick disconnect options

    Indeed, whenever I use a pre-drilled Tayda, minimum I have to ream out the LED hole to 6mm for the bezels I use and 1/2” for the DC Jack. Takes maybe 30 seconds and lets me use the parts I prefer though
  14. M

    Power jack quick disconnect options

    If you add an extra nut on the inside, an Outie doesn’t end up sticking out nearly as far, about on-par with the small Lumbergs. Worth a shot!
  15. M

    Power jack quick disconnect options

    Another win for team Outie DC Jack 🔥🔥🔥
  16. M

    SOLVED Lead Solder 16mm right angle pcb mounted Potentiometer

    Any chance you didn't print your drill template at 100% full size (like maybe you selected "zoom to fit" or something instead of "print at 100%")? It's the standard PedalPCB 6-knob layout but with one extra hole for the "Deep" switch, so unless you were working off of an inaccurate drill...
  17. M

    Fuzz Face Mod

    Aion's instructions for their Solaris board say "Set the Contour knob just above 9:00" when biasing, I vaguely remember an earlier version of the board specifically saying they'd borrowed the "Contour" control straight from the Fulltone 69 so I'm assuming just above 9:00 was the case in the original
  18. M

    Catalinbread entering DIY market?

    Annoying they went with wires for the DIY kit but use long-pin pots on their own pedals. Saves them maybe one or two cents per pot to go with solder lug?
  19. M

    Catalinbread entering DIY market?

    The pots are wired off board - the *most* annoying way they could’ve gone with off board wiring.
  20. M

    Sunflower mod for EMGs?

    I've seen that done before, usually marketed as passive "unbuffer" pedals (I found more than few just searching "unbuffer" on reverb), but they usually don't have the trimpot after them so that'd be a nice addition if you were gonna build one
Back
Top