Search results

Hey @Giorfida Thank you so much for the explanation, I will probaby buy a UPS/BPS, Can you recommend one that will not cost too much ? I just want to "clean" my electricity from the Power Line. BTW new update, I´ve ordered a new IC TL074 and the new one don´t make any noise even using the...

Well in my case the problem is not the Cioks is more related with the Power Line TP-Link that insert lot´s of noise in my electricity. If I desconnect the Power line TP-Link everything works perfecty, but I need to have internet in my studio, that is far from the router 200 meters. and I cannot...

Was just to make sure the hiss/hum can be noticeable heard just that. Thank you as well for trying to help in these cases all tips are really welcome when we don´t have any conclusion about what causes the issue.

Well I think I know what the problem is now. I was able to reduce the noise in 85/90% or more! First the power supply Cioks is connected to a Power Line TP-Link that adds lots of noise in some type of circuits. (Fuzzes for Example) Than the other batteries I was using was too old. So I...

Another suspicion I have is that the LDRs are of low quality, as I bought a kit and they normally don't use more expensive LDRs I think.

I have 2 plastic covers, pots are not touching the PCB I have 2 plastic covers, pots are not touching the PCB I am using the pedal with Fractal Audio FM3 and it´s a quite silence unit, other pedals I´ve tested with like the Electrovibe and it´s dead quiet. Yes I´ve used a compressor but it´s...

Hi all, Hope you´re doing well, I am having too much noise with this pedal, when I increase the level knob there is a huge amount of noise/hiss that I am trying to figured out what can be but without any sucess at this time. Already check the Pot and seems to be ok, (Deoxit D5 applied too) and...

Will start building the Twin Face in a couple of days, and I will follow these Mods tips on my project, I always like to have my unit volume at 12 o´clock or less, hope these Tip can help with. My "mods" will be for R3 and R7 1k instead of 470R And for C2 and C4 like @Chuck D. Bones recomended...

Hi @hamerfan @Harry Klippton @MichaelW @KR Sound @music6000 @chris.knudson Problem solved by myself, but thank you for all your comments trying to help me. I was working on this issue for 1 Week and half, and for somehow I tested the pedal with many different power suplies and even 9V...

With a standalone 9V power supply, connected only with this pedal This one: https://fuzzmonster.dk/en/shop/accessories/power-supplies/diago-micropower9-9v-dc-1000-ma-power-supply/ Thanks Eric: If I turn the trim pots higher is even worst, normaly I keep then in the middle, but already tried...

Ok but the IC LT1054 is on build documentation from PedalPCB. Could you point me one that will works? Thank you

So what should I change ?

Hi again, I´ve changed the toggle switch for a new one a better one and I am facing the same problem as the video on my first post. Would like to know if someone can help with this? Thank you Regards

@music6000 Did what you asked me to do but didn´t work. Thank you for this tip, now I can order a better toggle switch than these ones really cheap. This is my 3rd project that I use this brand/type toggle switch and the problem came from this crapy TS. Hope with a better switch this thing...

Can you explain me how to do that ? which 2 pad are you talking about ? Thanks for the help in advance

Well I already changed the transistors and is the same, when the Level low is at noon this thing start to drive me crazy with this sound. Don´t know if can be the cheap toggle switch or the level low footswitch OR some cable Or the POTs or any component :confused::(

Happens the same but less pronounced.

Ok, here is a macro photo from the socket, one dont have the plastic cover, can be this?

Thanks the Germanium transistor is a AC125 (Instead of the OC71) and the IC is the LT1054

Checked that and no, they are well connected. I´ve attached the germanium and sillicon transistors into sockets, but one of the sockets the plastic cover was taken off, can be that ? I can try to round a plastic from the socket into the legs of the transistors to see if the problem presists.