Search results

That's arguably my favourite drive pedal ever. It's not on my board for a couple of reasons but the sound isn't one of them. I actually purchased a CIOKS AC-10 to power it and the rest of my pedalboard, but it's not externally switchable and it doesn't like having power connected after a...

Effectslayouts does a JC-120 preamp board.

Ah, makes perfect sense. Either/or!

Can I ask why you've got two power sockets?

I'll grab a couple of those boards too please (shipped to Australia, if you will).

Joining in on a necrothread - I'm finding that every bluesbreaker variant that doesn't have some sort of post booster struggles to make unity unless it's fairly dimed. Built a couple of BBs from various vendors, and 5 paragon minis so far...

Sorry, I misread 34w as 34v

Interestingly, my little boards died at 24v. 19v was fine, but they stopped working after that. Have you gone all the way to 34?

There's no such thing as too much power!

That's my experience too. They work, but just not what you would expect as far as volume goes.

So what's powering that?

That was just a pic I got off the web. My actual build is this one:

The 3116 is fairly good, I've gigged with one of these, but they are substantially larger.

I haven't had any issues with the 3118 or 3116 in terms of noise. It can vary a little between power supplies, but I've found the higher wattage amps to be terrible for noise - to the point of not using them, lol. I have a couple around that will need proper transformer based power, but as far...

These things need a buffer in front of them to get any sort of usable volume.

Any docs for the Basic Relay DPDT Switch (Latching) please?

Just confirming - the silkscreen says 78L09. Should it be a 78L05?

Either/or. Those 60watters blow at @24v.

Hopefully the caps are a bit better at handling 24v. The ones on the little 60w modules *say* 35v iirc, but will blow at 24. I doubt these are 100w. I've been running mine at 19v, its ok. Might try one of these out, as I have a couple of higher power laptop supplies to try.

I'm cutting the ends off my laptop power supplies and replacing them with 2.1mm, wired to center negative.