Search results

This thread gave me an idea.. I made me a pressed rosin hash oil and hemp paper Cannapacitor™. I used a roll of Vibes hemp rolling paper copper sheild tape and pressed cannabis rosin mixed with hemp seed oil. I didn't have any cbd but I have a stupid amount of old weed that I pressed. Now I got...

You can use SMD electros and carefully bend the legs. I did it with a different board and I plan on doing it with the Electrovibe mini too

https://griffineffects.com/byo-pcbs/modulation/ricochet-pcb I've been eyeing this. Anyone tried it? EDIT: There's some threads here on it. Looks like there is a problem with a resistor not being the correct value in the doc

I've stacked a Mesa DR. and Benzin EQ from pcbguitarmania using the long legged pots like @jcpst is fixin to do. It just barely fit and the knobs a very close to the footswitch

grounding the signal I don't think so, Is the Ungula unbuffered FF style?

I just turned the trim pots until it sounded good. It seems to sound better with single coils. I was wondering what is the proper way to trim it? Also I noticed some white noise if I hold the kill switch button on my guitar only happens with this pedal. Maybe because its not trimmed right? The...

ahh It should show up when I search "orange" ya think? I didn't know about the EQD Monarch. Also the same for the Super Hard On I got the Tayda version but found out later its the CrackleJack here. I mostly wanted the Orange King Drive I didn't know there's a PPCB version, I'll just get that

trying to get the Orange and Sunn amp sound

I just tried to make an order and they don't currently ship to the US now Front page says: USA: We'll be back with you as soon as the tariff mess is get-head-roundable and systems are in place to ensure smooth shipping and import. 🤖 🧟‍♂️:mad: It's unbelievable I can't buy this because The...

I think this guy figured it out I tried a quick search but could't find anyone that has separated that chorus from that amp. I would start with a clean chorus maybe a CE-2?

Two of my favs are the Boogie Monster and the Triple Wreck. I love that crunchy Mesa/Boogie sound.

maybe put some blue loctite on all the nuts so they don't come loose? I don't think you have to worry about IC sockets coming loose. The round ones seem to hold better. I'm pretty sure the standard cases and switches are tour ready 125b, 3PDT, Alpha pots etc. Make sure your soldering is on...

BTW Thanks Mr. Feline. I think I had that Switch-craft thread bookmarked but forgot about it 😞 🤖

It's a Cream Pie Fuzz and a SHO board from Tayda. In a custom coffin case. I had this wacky Idea for a Coffin case while I wait for Tayda to powder coat. I had all the stuff sitting around to make this. Since I can't take it apart to redo the wiring this is the prototype. I will be making...

After putting it together I realized the LEDs are always on. This image shows how I should have wired it.(I think) I can't really modify the switches to fix it. So I'm going to dim or do away with the switch LEDs and make a LED to show if the pedal is in bypass or engaged. I think I can do this...

Pretty sure this will work and is cleaner. Still wondering if that's possible with the toggle though

I'm trying to work out this wiring. You only need one ground on the PCB right? I only need to connect -(negative) OR GND not both? Also is there any way to use a 3 way toggle instead of two toggles? I'd like: POS1 Fuzz only POS2 Both Fuzz and Boost POS3 Boost only with LED indicator

No shit! That's pretty cool. If they work I'll definitely buy a couple.

Yes I believe pedals are always powered as long as the power is plugged in. The footswitch just bypasses the signal.

I've been a busy boy