3pdt w/led ring on dual loop switcher

[rocket_appliances]

So i got the dual loop switcher as my first project. I decided to get fancy and use the 3pdt with the leds. Should i keep the 4k7 resistors or can i swap them out to make the rings brighter? Anyone added these switches and changed resistor values?

 

[Paradox916]

Depends on the colors you are using 4k7 for blue seems good for me but if you want say a red one to be of an equivalent brightness I have gone down to a 2k-3k I usually test them on a beadboard to check brightness before I install.

 

[jeffwhitfield]

Actually, the LED's in the 3PDT's are self contained. The 4K7 resistors won't impact them at all. You do need to jumper the LED spot on the board though...otherwise it won't work. If you leave out the 4K7 you probably need to jumper it as well to keep the circuit intact.