JamieJ
Well-known member
I am planning a utility board build and want to use 6 pcb mounted jacks.
Placement is obviously key to avoid mechanical strain on the joints. With the side of a 125B enclosure being angled - where is the best place to place the jacks in relation to the enclosure? See screenshots below.
I use the 125B template in diptrace.
Placement is obviously key to avoid mechanical strain on the joints. With the side of a 125B enclosure being angled - where is the best place to place the jacks in relation to the enclosure? See screenshots below.
I use the 125B template in diptrace.
