pcb rookie
Active member
Good evening - getting ready to build a Fichsia Fuzz .... I'm pretty exited to try this one out. I'll be doing the 5 knob version.
My understanding is that Q3 is highly driven by the BC550C in Q2.
What hFE should I be targeting for Q2 (BC550C) and Q3. I'm planning on experimenting at Q3 with 2N1308's and 2N1306's. Any other transistor I should experiment with?
If you have any other recommendations, I am really opened to suggestions ... I will probably build more than one ...
Thanks in advance for your contribution!
Build docs: https://docs.pedalpcb.com/project/FuchsiaFuzz.pdf
My understanding is that Q3 is highly driven by the BC550C in Q2.
What hFE should I be targeting for Q2 (BC550C) and Q3. I'm planning on experimenting at Q3 with 2N1308's and 2N1306's. Any other transistor I should experiment with?
If you have any other recommendations, I am really opened to suggestions ... I will probably build more than one ...
Thanks in advance for your contribution!
Build docs: https://docs.pedalpcb.com/project/FuchsiaFuzz.pdf
