Locrian99
Well-known member
I just was hoping to clarify this. I’m fairly certain I’m looking at it right.
Test a germ RG keens method
1258 mv with base connected to the 2m2 to ground
260 mv with it removed
So I have a 126 hfe transistor with a leakage of 260 mv. Giving me a true hfe of 100 basically.
When selecting a transistor for a build would I treat this as being 126hfe transistor or 100, if I’m doing a fuzz face and I’m going for 120-130hfe for q2 would this be a candidate I guess or would it be better as q3 in a pasty face where it calls for 110 hfe.
Obviously trying it there and how it sounds is the final thought but I’m kind of just curious how to look at that.
Test a germ RG keens method
1258 mv with base connected to the 2m2 to ground
260 mv with it removed
So I have a 126 hfe transistor with a leakage of 260 mv. Giving me a true hfe of 100 basically.
When selecting a transistor for a build would I treat this as being 126hfe transistor or 100, if I’m doing a fuzz face and I’m going for 120-130hfe for q2 would this be a candidate I guess or would it be better as q3 in a pasty face where it calls for 110 hfe.
Obviously trying it there and how it sounds is the final thought but I’m kind of just curious how to look at that.
