Kliche “2 Volume” Mod

yazooligan

Active member
Hey folks. I have a customer trying to solve a problem. He uses a Kliche I built into an Orange Rockerverb head. He uses it on both the clean and dirty channels, but he has to lean down and turn the volume pot to a lower setting before using it on the dirty channel.

Can I add another volume pot or trim pot internally that he can switch to with a footswitch?

Thanks, friends!
 
You can use a 3PDT for two vol pots. Middle row is wires going to vol pots (from PCB), top row goes to vol pot A, bottom row to vol pot B. If you want an LED for the channel then you’ll need a 4PDT.
 
Back
Top