Audandash
Well-known member
Use at your own risk. Not verified yet. I took measurements off the drill template and also the physical board. I will mark it verified once I finish it.
Led's are 3mm with no housing. I used top mount jacks but you can do them on the side towards the bottom.
https://drill.taydakits.com/box-designs/new?public_key=bWMyaWg5RXdZTWVXMk1iOW0yWFN2QT09Cg==
Led's are 3mm with no housing. I used top mount jacks but you can do them on the side towards the bottom.
https://drill.taydakits.com/box-designs/new?public_key=bWMyaWg5RXdZTWVXMk1iOW0yWFN2QT09Cg==