1590XX PedalPCB - Duo-Phase [1590XX]

[ch4mpi]

Hello mates,

Is there someone who have done a Tayda drill template for PedalPCB DUO-PHASE ?
It would be a great help for me !

Is there some "basic" measurements for FSW placement / top DC + jacks ?

And, sorry for bad syntax, i'm a dummy french, and like nearly all french people, i'm bad with foreign languages

Thanks,
Phil

 

[TravisM]

I have the (x,y) coordinates captured accurately. I used known working diameters for the pots, footswitchs and I/O jacks that I source from Tadya. I used a measured diameter for the toggle switches, DC jack and LEDs. Please double check all the diameter values per the actual components you plan to use as the diameters can very based on specific component chosen. I added the .2mm for powder coating already.

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com

 

[ch4mpi]

Hi TravisM

Thanks a lot for your precious help ! And, yes of course, i'll match hole diameters with components i will choose for my project. This is gonna be great !