jessenator
Well-known member
Just a quick question for those who've done it via JLC: I've done a test upload (and the gerber viewer shows it correcttly), but will JLC kick back an order where I've deleted the
i.e. I want to do a bottom-trace board with only bare FR4 and the silkscreen on top. Wondered if JLC will just not do it, or if they contact me, or whatever.
copper_top and soldermask_top, but leaving the silkscreen_top gerber files in the zip?i.e. I want to do a bottom-trace board with only bare FR4 and the silkscreen on top. Wondered if JLC will just not do it, or if they contact me, or whatever.