Parallel / Stacked 3pdt board?

[Magous]

Hi. Long time listener, first time caller.
If I wanted to put a Gerkin and a Pauper in one enclosure, with an option to run then parallel or stacked, with a blend preferably, how would I go about doing that?

Is there a board that exists ( 3pdt board, etc ) that can make that easier?

Appreciate you

 

[jwin615]

There's no simple way to do it, that I'm aware of.
You need a lot of poles. Switching between modes you'd have to flip the ins and outs plus include/omit an input buffer/splitter and an output mixer.
It could be done with piano switches, but I haven't seen a PCB premade to perform such a task. There are pedals that specifically do this. But no PCBs. I think Robert has one in the pipeline. There's also the new micro blend.

There's the split and blend as well. I think you can use it and a 4pdt, but there is some limitation that escapes me.

 

[Magous]

There's no simple way to do it, that I'm aware of.
You need a lot of poles. Switching between modes you'd have to flip the ins and outs plus include/omit an input buffer/splitter and an output mixer.
It could be done with piano switches, but I haven't seen a PCB premade to perform such a task. There are pedals that specifically do this. But no PCBs. I think Robert has one in the pipeline. There's also the new micro blend.

There's the split and blend as well. I think you can use it and a 4pdt, but there is some limitation that escapes me.

What if I skipped the switch and just ran them permanently parallel. Do you know how I would wire that? I’m having trouble finding anything on it on the ol’ interwebs.

 

[jwin615]

Forgot about GCI
$$$

Series Parallel pre-populated DIY PCB

Series Parallel switcher for two effects Series Parallel is an active summing amp circuit which can help the builder put two circuits in one enclosure and switch them between series and parallel operation. The PCB is fully populated with resistors, IC's, and most capacitors. Just add two 100...

www.godcityinstruments.com

 

[jwin615]

Oof. Sold out.
There's also the split n blend
Moonn has a PCB.
Fuzzdog had a blender, but I couldn't find it on a quick seach
PCBGM has "the blender" but tread with caution
Or pickup a EHX Parallel Mixer or OBNE Signal Blender
Robert traced a parallel blender, maybe the OBNE, but no PCBs yet...

 

[Magous]

Oof. Sold out.
There's also the split n blend
Moonn has a PCB.
Fuzzdog had a blender, but I couldn't find it on a quick seach
PCBGM has "the blender" but tread with caution
Or pickup a EHX Parallel Mixer or OBNE Signal Blender
Robert traced a parallel blender, maybe the OBNE, but no PCBs yet...

Appreciate you so much