Band of Dans's latest activity

Yet another kliché overdrive. Thought you guys might enjoy it anyway. I always like to see what people do with their enclosures. It was...

Geez. When I put through hole parts in, I use small pliers to pull them down all the way (or with larger resistors I’ll have a removable...

Anything I can't keep in place by bending the leads I just hold with my finger. I let the solder hang off the front of my bench and I...

So here's ANOTHER Low-Tide build. It must be the season! 🤣 Overall, the build went relatively smoothly, although troubleshooting was...

I've built a bunch of other mutron III based filters and I greatly enjoy the sound, it's a widely beloved envelope for good reason. For...

Nice work! The fabric on this one looks like it was perfectly molded for the enclosure. Beautiful!

Hey all! Just finished boxing this bad boy up. Overall it was a super straightforward build, and all the components were easy enough to...

Just build seemed quite easy as I just finished a Abductor II delay, which seemed a bit harder to keep an eye on what your putting in.

This is a Mask Audio Electronics board. I'd originally built it to their Big Clang spec, and it was meh. So, I tried the Albini spec...

So, this is the ElectroVibe preamp feeding @Robert's EQ, Anyone? (based on Nathan East's Yamaha NE-1 pedal). I've tried the Anyone as...

Thanks! And FWIW, I refer to knob range indicators as "dials".

As a bmp guy and a frequent Zappa listener I had to build this one. I knew it wouldn't be good for bass but I built it anyway. It...

Found a value tube 12au7 for ¥100 at a shop here in Japan($1). Thought I'd give this old layout a try after many years of wanting to...

I've spent an inordinate amount of time creating a combo build with 3 footswitches in a 1590DD case. The picture tells most of the...

Howdy folks! This was a pedal I always wanted to try as I'm a fan of Ariel Posen, who I think used it and has a signature version of...