Recent content by BisonG

I finally had the time to implement this mod in my build and it works great! It's exactly what I was looking for to get back those bass frequencies when the reverb is engaged. I also like this pedal as a prramp and get nice saturation out of it when driving it hard. I tend to reduce the reverb...

Fantastic answer! Really nice of you to explain us in detail. Will try different caps and will report back. Cheers! G

Thank you very much for taking the time Tassieviking. You were right, it must've been a broken trace, after going through your trouble shooting guide, there was no continuity between the left side of R12 and the 2 pins on the right of the 10 pin link to the tube PCB. The jumper solved the issue...

Thanks, I measure 0 volts at the pins, 0 volts at the Resistor and 8.78v at the +side of the LED

Hi guys, I finally had time to go back and check SamueG's suggestion. Swaped the LED and no response. The LED does work, emitting light using the Diode setting on the multimeter. Any other suggestion? Also, I notice that the effect takes away the low frequencies when engaged. Will it be a matter...

Already did that, but will do it again just in case

Not sure if you ever got this fixed. Mine looks like yours and I've got the same issue. The LED doesn’t turn on but the reverb works. I get 8.65v on the positive side and 6.85V on the negative side. Measuring as Diode turns the LED on. If I measure the LED in Diode I get -2.31v and the LED...