Crowbar

Yes it's the "top" pot. I have only tried with my guitar as input, but by turning that pot you can sometimes find a "sweet spot" where...

I have tried it both inside the enclosure and outside of it, there is no real difference except its a bit more noisy outside of the box...

I think I have them correctly in the sockets, but Im also thinking one of them might have gotten damaged from being removed and inserted...

It's 400 degrees Celsius, but I don't know how accurate it is. My process is similar to yours but I think I am trying to do it quicker...

Thanks for the encouragement, I will not give up of course but when I posted I was really tired of this thing.. It's like every time I...

I don't know if anyone is reading this, but anyway, I have decided to give up on this pedal for now, I don't know how to fix it. One...

I think I need to practice soldering more. I use too much solder sometimes I think, I get these "balls" of solder on the components...

This took a very strange turn. I re did all the cables, adding some length for a bit neater routing. Still not working, AM radio in...

A small update, I measured the voltage on al IC pins and noticed that pin 4 on IC1 had +5 v, which seemed wrong since that's the ground...

I haven't quite figured out which one is which of the + lugs, so I always connect the red wire to both. It has worked in all my other...

Yes, all pots have the plastic covers. I bought it as a kit from Musikding. I will try re seating the IC:s. Im not sure I'm doing it...

Hello all, I just finished building a UniCab pedal, but it's not working. I get a high pitch noise and turning the knob changes the...