Recent content by Danny13

I see the original Harmonic Percolator had a 100p silver mica cap in C1 and 47u tantalum in C4. Would these make much difference in sound? Is it worth the trouble?

I've found 4 resistors wrong, 2 my fault and 2 from a mislabeled bag from Tayda. Waiting on new parts for now. Thank you to everyone who has helped me out so far! Much appreciated!

I found 2 ceramics that had continuity but after removing them from the board they tested fine. Here are the transistor voltages-

I think I have a dead component. The question is what would make the entire board go dead, I do have voltage at various point on the board. Also I tested each component before soldering. I found one bad ceramic before installing, I see that those cheapo ceramics aren't the best way to go and...

Ive looked very close at the ceramics, nothing jumps out. I reflowed the pots and any suspicious connection. The wires from the switches some look very close to each other but I rang them out nothing is shorting. Ya too generous with the solder, I will be buying a proper fine tip iron for...

Yes all dead just dry signal passes through.

Hello, Pretty new to pedal building but have some experience with electronics although basic. My project currently powers on all leds and the dry signal bypasses but that's it. I did have the input and output both wired wrong. I suspect that something fried. After hooking up the input and...