dawson

I'd run into issues with Klon clones not playing nicely with some of my vintage effects - especially the Electric Mistress. After a bit...

This has been on my build list for a long while (since September last year, to be exact). I took a good couple of days building and then...

The Muffinator build went great, violet ram's head specs with Fairchild SE4010's and a tone bypass outlined by @Feral Feline here...

I use blu tack but also run into issues described in this thread, for me it's just barely ekes out compared to using tape: it's easier...

PSA, blue tack is a petroleum based product(what isn't?). If yours is too stiff, knead a bit of oil into it. It only takes a tiny...

Built stock, with an added transistor flipper for Q6 Pretty gnarly and brootal in all settings. I dig it quite a bit. Not much else to...

Ok I neglected these for a few months but they're done, and really fun to play. Had to go back and check my notes on what I changed. I...

Nah, just tack solder a couple leads from one to the other

So here's ANOTHER Low-Tide build. It must be the season! 🤣 Overall, the build went relatively smoothly, although troubleshooting was...

Hey all! Just finished boxing this bad boy up. Overall it was a super straightforward build, and all the components were easy enough to...

OK, so when you have built as many pedals as I have (*insert self-important Barney Fife sniff*) and put most of them in your chain, you...

Awesome build- The finish on that enclosure is far-out!

I've built a bunch of other mutron III based filters and I greatly enjoy the sound, it's a widely beloved envelope for good reason. For...

The internet!? I hope you're joking....